@article { author = {Hakimi, Alireza and Moslemi, Hamid}, title = {Modeling of Analysis Craek using Adaptive Finite Element Method Via Stress Intensity Factor Error Estimation}, journal = {Journal of Structural and Construction Engineering}, volume = {2}, number = {3}, pages = {57-68}, year = {2015}, publisher = {Iranian Society of Structural Engineering (ISSE)}, issn = {2476-3977}, eissn = {2538-2616}, doi = {}, abstract = {The use of numerical methods, particularly finite element methods in solving different problems are used in abundance. Because these methods are approximate, having a real understanding of the extent and distribution of the errors is extremely important. Studies show that the mesh used in the finite element method will be an essential error rate. So many different ways to find the optimal mesh and minimize the error of the proposed method. These methods are mainly aimed at reducing the error in the stress field have been obtained. Although one of the aims of reducing errors tension field finite element method is adaptive, but no guarantee is intended to achieve specific issues. These issues can be Craek to the issues noted in the analysis of the elastic parameters of the stress intensity factor will play a key role in determining the direction and Craek the design. The purpose of this study is to measure the stress intensity factor adaptive analysis on the parameter to be modified to accommodate ancillary parameters such as strain, stress intensity factor able to modify the target parameter}, keywords = {Adaptive finite element method,Analysis cracks,Stress intensity factor,Parameter estimation error}, title_fa = {بکارگیری روش اجزای محدود تطابقی در مسائل گسترش ترک با تخمین خطای ضریب شدت تنش}, abstract_fa = {امروزهاستفادهازروش‌هایعددیبهویژهروشاجزایمحدود،درحلمسائلمتفاوتکاربردفراوانیدارد.ازآنجاکهاین روشهاتقریبیهستند،داشتندرکیواقعیازمیزانونحوه توزیعخطاهااهمیتبسیارزیادیدارد.بررسی‌ها نشان می‌دهد که شبکه مورد استفاده در روش اجزای محدود نقش بسیار اساسی در میزان خطای روش خواهد داشت. بنابراین روش‌های مختلفی برای یافتن شبکه بهینه و کاستن خطای روش پیشنهاد شده است. این روشها عمدتاً هدف را بر کاستن خطا در میدان تنش به دست آمده قرار داده‌اند. هر چند کاهش خطای میدان تنش یکی از اهداف روش اجزای محدود تطابقی می‌باشد، ولی تضمینی برای رسیدن به اهداف در مسائل خاص مورد نظر نمی‌باشد. از جمله این مسائل می‌توان به مسائل تحلیل ترک اشاره نمود که در تحلیل الاستیک آن پارامتر ضریب شدت تنش نقشی کلیدی در تعیین مسیر ترک و طراحی مربوطه خواهد داشت. در این تحقیق هدف این است که معیار آنالیز تطابقی بر روی پارامتر ضریب شدت تنش قرار گیرد تا به جای اصلاح پارامترهای جانبی نظیر کرنش به اصلاح پارامتر هدف یعنی ضریب شدت تنش بپردازیم.}, keywords_fa = {ضریب شدت تنش,تخمین خطا,روش اجزای محدود تطابقی,گسترش ترک}, url = {https://www.jsce.ir/article_38644.html}, eprint = {https://www.jsce.ir/article_38644_70003e30bb8a38b20813bca8ec169ae9.pdf} }