[1] Shekarchizadeh, M., Doosti, A. and Mardani, F. (2008), Effect of chloride binding on the reduction of bars corrosion in the reinforced concrete structures, 4th National Congress on Civil Engineering, University of Tehran, Tehran (In Persian).
[2] Shekarchizadeh, M., Chini, M. and Moradian, M. (2012), Assessment of rebars corrosion in the high performance concrete under Persian Gulf region, case study, 4th National Congress of Concrete, Iranian Concrete Institute, Tehran (In Persian).
[3] Shekarchizadeh, M., Valipour, M. and Pargar, F. (2010), Effect of Silica Fume, Metakaolin, Zeolite and Polypropylene Fiber on Chloride Diffusion in Concrete, Journal of Civil Engineering (Ferdowsi University of Mashhad), Vol. 22 (1), 83-96 (In Persian).
[4] Ramezanianpour, A. A. and Pourkhorshidi, A. R. (2006), Assessment of durability of marine concrete structures with different cements and pozzolans in Persian Gulf Environment, 7th International Conference on Coasts, ports and Marine Structures, Port and Maritime Organization, Tehran.
[5] Ganjian, E. and Sadeghipouya, H. (2009), The effect of Persian Gulf tidal zone exposure on durability of mixes
containing silica fume and blast furnace slag, Construction and Building Materials, Vol. 23 (2), 644-652.
[6] Gruber, K. A., Ramlochan, T., Boddy, A., Hooton, R. D. and Thomas, M. D. A. (2001), Increasing concrete durability with high-reactivity metakaolin, Cement and Concrete Research, Vol. 23 (6), 479-484.
[7] Faraji, H. K. and Afshin, H. (2005), Durability of reinforced Concrete containing different pozzolanas in Urmia lake region, 2nd National Congress on Civil Engineering, Iran University of Science and Technology, Tehran, Iran (In Persian).
[8] Bai, J. and Wild, S. (2002), Investigation of the temperature change and heat evolution of mortar incorporating PFA and metakaolin, Cement and Concrete Composites, Vol. 24 (2), 201-209.
[9] Chehkandi, S., Miri, M. and Givechi, M. (2011), Durability of self-compacting concrete containing nano-silica under sea water and tidal conditions, 6th National Congress on Civil Engineering, Semnan University, Semnan (In Persian).
[10] Tasnimi, A. and Khorami, M. (2005), Effect of reinforcement corrosion on the flexural strength of reinforced concrete structures under cyclic vertical loads, 2nd International Conference on Concrete and Development, Road, Housing and Urban development Research Center, Tehran.
[11] Pourbehi, P. and Behfarnia, K. (2006), Long term effect of reinforcement's corrosion on the load bearing capacity of concrete elements under seawater region, 7th International Congress on Civil Engineering, Tarbiat Modares University, Tehran.
[12] Vidal, T., Castel, A. and François, R. (2007), Corrosion process and structural performance of a 17 year old reinforced concrete beam stored in chloride environment, Cement and Concrete Research, Vol. 37 (11), 1551-1561.
[13] Building National Regulations Office, (2012), 9th part of building national regulations, Design and construction of reinforced concrete structures, Tehran, Toseae Nasre Iran.
[14] Neville, A. M. and Brooks, J. J. (2010), Concrete Technology, Prentice Hall, New Jersey, 409-414.
[15] Al-Tayyib, A. J. and Shamim K. M. (1991) Effect of sulfate ions on the corrosion of rebars embedded in concrete, Cement and Concrete Composites, Vol. 13 (2), 123-127.
[16] Dillshad, K. H. A. (2011), Degree of Hydration and Strength Development of Low Water-to-Cement Ratios in Silica Fume Cement System, International Journal of Civil & Environmental Engineering IJCEE-IJENS, Vol. 11(5), 10-15.
[17] Mahmoodi, A., Afshin, H., Hakimzadeh, H. and Jalali D. (2009) Investigation of the reinforced concrete durability in severe corrosive marine environment according to its position with respect to sea level, Journal of Marine Engineering, Vol. 5 (10), 77-87.