[1]Ramezanianpour, A. Firoozmakan, Sh. and Ebadi, T. (2011). The effect of nano silica colloidal solution on the properties of mortar. In: Sixth National Congress on Civil Engineering. Semnan, Iran.
[2] Korpa, A. and Trettin, R. (2004). The Use of Synthetic Colloidal Silica Dispersions for Making High Performance and Ultra High Performance Systems (HPC/UHPC). In: International symposium on Ultra High Performance Concrete. Kassel, Germany, 155-164.
[3] Rougeau, P. and Borys, B. (2004). Ultra High Performance Concrete with Ultrafine Particles Other Than Silica fume in Ultra High Performance Concrete. In: International Symposium on Ultra High Performance Concrete, Kassel University Press, Kassel, Germany, 213-225.
[4] Graybeal, B. (2006). Material Property Characterization of Ultra-High Performance Concrete. Federal Highway Administration, Publication No. FHWA-HRT-06(103).
[5] Fehling, E. Bunje, K. and Leutbecher, T. (2004). Design Relevant Properties of Hardened Ultra High Performance Concrete. In: International Symposium on Ultra High Performance Concrete, Kassel University Press, Kassel, Germany, 327-338.
[6] Droll K. (2004). Influence of Additions on Ultra High Performance Concretes – Grain Size Optimization. Proceedings of the In: International Symposium on Ultra High Performance Concrete, Kassel University Press, Kassel, Germany, 285-301.
[7] Rahdar, H. A. and Ghalehnovi, M. (2016). Post-cracking behaviour of UHPC on the concrete members reinforced by steel rebar. Computers and Concrete; An International Journal, 18(1), 139-154.
[8] Yazici, H. (2007). The Effect of Curing Conditions on Compressive Strength of Ultra High Strength Concrete with High Volume. Mineral Admixtures. Building and Environment, 42(5), 2083-2089.
[9] Baena, M. Torres, L. Turon, A. and Miàs, C. (2013). Analysis of cracking behaviour and tension stiffening in FRP reinforced concrete tensile elements. Composites Part B: Engineering 45(1), 1360-1367
[10] Doo-Yeol, Y. and Banthia, N. (2015). Numerical simulation on structural behavior of UHPFRC beams with steel and GFRP bars. Computers and Concrete; An International Journal, 16(5), 759-774
[11] Deng, Z.C. Jumbe, R.D. and Yuan, C.X. (2014). Bonding between high strength rebar and reactive powder concrete Computers and Concrete; An International Journal, 13(3), 411-421.
[12] Vijay, P. (1999). Aging and design of concrete members reinforced with GFRP bars. PhD Thesis. West Virginia University
[13] Newhook, J. Ghali, A. and Tadros, G. (2002). Cracking and deformability of concrete flexural sections with fiber reinforced polymer. Journal of Structural Engineering, 128(9), 1195-1201.
[14] Tighiouart, B. Benmokrane, B. and Gao, D.(1988). Investigation of bond in concrete member with fiber reinforced polymer (FRP) bars. Construction and building materials, 12(8), 453-462.
[15]Tighiouart, B. Benmokrane, B. and Mukhopadhyaya, P.(1998). Bond strength of glass FRP rebar splices in beams under static loading. Construction and Building Materials, 13(7), 383-392.
[16] Lee, JY. Kim, TY. Kim, TJ. Yi, CK. Park, JS. You, YC. And Park, YH. (2008). Interfacial bond strength of glass fiber reinforced polymer bars in high-strength concrete. Composites Part B: Engineering, 39(2), 258-270.
[17] Baena, M. Torres, L. Turon, A. and Barris, C. (2009). Experimental study of bond behaviour between concrete and FRP bars using a pull-out test. Composites Part B: Engineering, 40(8), 784-797.
[18] Davalos, J.F. Chen, Y. and Ray, I. (2008). Effect of FRP bar degradation on interface bond with high strength concrete. Cement and Concrete Composites, 30(8), 722-730.
[19] Achillides, Z. Pilakoutas, K. (2004). Bond behavior of fiber reinforced polymer bars under direct pullout conditions. Journal of Composites for Construction, 8(2), 173-181.
[20] ACI, A., 440.3 R-04. (2004). Guide Test Methods for Fiber-Reinforced Polymers (FRPs) for Reinforcing or Strengthening Concrete Structures. American Concrete Institute, Farmington Hills, USA, 350
[21] CEB-FIP. (1993). CEB-FIP Model Code 1990 for Concrete Structures.Committee Euro- International du Beton and Federation International de la Precontrainte. ThomasTelford, London.
[22] Rizkalla, S.H. Hwang, L.S. (1984). Crack Prediction for Members in Uniaxial Tension. ACI.Journal, 81 (11), 572-579.
[23] Shayanfar, M.A., Ghalehnovi, M. and Safiey, A. (2007). Corrosion effects on tension stiffening behavior of reinforced concrete. Computers and Concrete; an International Journa, 4(5), 45-70.
[24] Cosenza, E. Manfredi, G. and Realfonzo, R. (1997). Behavior and modeling of bond of FRP rebars to concrete. Journal of composites for construction, 1(2), 40-51.
[25] Rahdar, Hosseinali. (2016). Investigation of tension-stiffening of Ultra-High performance concrete reinforced by steel and GFRP bars. PhD Thesis. Ferdowsi University of Mashhad, Department of Civil Engineering
[26] Lubliner, J. Oliver, J. Oller, S. and Onate, E. (1989). A plastic-damage model for concrete. International Journal of Solids and Structures, 25(3), 299-326.
[27] Lee, J. Fenves, G.L. (1998). Plastic-damage model for cyclic loading of concrete structures. Journal of engineering mechanics, 124(8), 892-900.
[28] Kachanov, L.M. (1999). Rupture Time under Creep Conditions. International Journal of Fracture, 97(1), 11-18.
[29] Malm, R. (2009). Predicting shear type crack initiation and growth in concrete with non-linear finite element method. PhD Thesis. Royal inistitute of thechnology.
[30] Grassl, P. Jirasek, M. (1999). Damage-plastic model for concrete failure. International journal of solids and structures, 43(22), 7166-7196.
[31] Jankowiak, T. Lodygowski, T. (2005). Identification of parameters of concrete damage plasticity constitutive model. Foundations of civil and environmental engineering, 6(1), 53-69.
[32] Lopez-Almansa, F. Alfarah, B. and Oller, S. (2014). Numerical simulation of RC frame testing with damaged plasticity model. Comparison with simplified models. In Second European Conference on Earthquake Engineering and Seismology. Istanbul, Turkey.
[33] Birtel, V. Mark, P. (2006). Parameterised finite element modelling of RC beam shear failure. In ABAQUS Users’ Conference.