[1] Aboutaha, R. S., Engelhardt, M. D., Jirsa, J. O. and Kreger, M. E. (1999). Rehabilitation of shear critical concrete columns by use of rectangular steel jackets. Structural Journal, 96(1), pages 68-78. [2] Del Zoppo, M., Di Ludovico, M., Balsamo, A., Prota, A. and Manfredi, G. (2017). FRP for seismic strengthening of shear controlled RC columns: Experience from earthquakes and experimental analysis. Composites Part B: Engineering, 129, pages 47-57.
[3] Sezen, H. (2002). Seismic behaviour and modelling of reinforced concrete building columns. Ph.D. University of California at Berkeley, Berkley, CA.
[4] Ousalem, H., Kabeyasawa, T., Tasai, A. and Ohsugi, Y. (2002). Experimental study on seismic behavior of reinforced concrete columns under constant and variable axial loadings. In: Proceedings of the annual conference of Japan concrete institute. Tsukuba: vol 24, no 2, pages 229–234
[5] Colajanni, P., Recupero, A. and Spinella, N. (2015). Shear strength degradation due to flexural ductility demand in circular RC columns. Bulletin of Earthquake Engineering, 13(6), pages 1795-1807.
[6] Ousalem, H., Kabeyasawa, T., Tasai, A. and Iwamoto, J. (2003). Effect of hysteretic reversals on lateral and axial capacities of reinforced concrete columns. In: Proceedings of the annual conference of Japan concrete institute. Kyoto: vol 25, no 2, pages 367–72. [7] Sezen, H. and Moehle, J. P. (2002). Seismic behaviour of shear-critical reinforced concrete building columns. In: Seventh US national conference on earthquake engineering. Boston: Earthquake Engineering Research Institute, MA.
[8] Elwood, K. J. (2004). Modelling failures in existing reinforced concrete columns. Canadian Journal of Civil Engineering, 31(5), pages 846-859.
[9] Osorio, E., Bairán, J. M. and Marí, A. R. (2017). Analytical modeling of reinforced concrete columns subjected to bidirectional shear. Engineering Structures, 138, pages 458-472.
[10] Elwood, K. J. and Moehle, J. P. (2005). Axial capacity model for shear-damaged columns. ACI Structural Journal, 102(4), pages 578.
[11] Baradaran Shoraka, M. (2013). Collapse assessment of concrete buildings: an application to non-ductile reinforced concrete moment frames. Ph.D. University of British Columbia.
[12] Ghee, A. B., Priestley, M. N. and Paulay, T. (1989). Seismic shear strength of circular reinforced concrete
columns. Structural Journal, 86(1), pages 45-59.
[13] Aschheim, M. and Moehle, J. P. (1992). Shear strength and deformability of RC bridge columns subjected to inelastic cyclic displacements. University of California at Berkeley, Berkeley, CA: Earthquake Engineering Research Center, [UCB/EERC-92/04]
[14] Wong, Y. L., Paulay, T. and Priestley, M. N. (1993). Response of circular reinforced concrete columns to multi-directional seismic attack. Structural Journal, 90(2), pages 180-191.
[15] Ho, J. C. M. and Pam, H. J. (2003). Inelastic design of low-axially loaded high-strength reinforced concrete columns. Engineering Structures, 25(8), pages 1083-1096.
[16] Lee, J. Y. and Watanabe, F. (2003). Predicting the longitudinal axial strain in the plastic hinge regions of reinforced concrete beams subjected to reversed cyclic loading. Engineering Structures, 25(7), pages 927-939.
[17] Moretti, M. and Tassios, T. P. (2007). Behaviour of short columns subjected to cyclic shear displacements: Experimental results. Engineering structures, 29(8), pages 2018-2029.
[18] Mullapudi, T. R. and Ayoub, A. (2010). Modeling of the seismic behavior of shear-critical reinforced concrete columns. Engineering Structures, 32(11), pages 3601-3615.
[19] Applied Technology Council (ATC 32). (1996). Improved seismic design criteria for California bridges: provisional recommendations. Redwood City, CA.
[20] Priestley, M. N., Verma, R. and Xiao, Y. (1994). Seismic shear strength of reinforced concrete columns. Journal of structural engineering, 120(8), pages 2310-2329.
[21] Sezen, H. and Moehle, J. P. (2004). Shear strength model for lightly reinforced concrete columns. Journal of Structural Engineering, 130(11), pages 1692-1703. [22] Hong-Gun, P., Choi, K. K. and Wight, J. K. (2006). Strain-based shear strength model for slender beams without web reinforcement. ACI Structural Journal, 103(6), pages 783. –793.
[23] Park, H. G., Yu, E. J. and Choi, K. K. (2012). Shear-strength degradation model for RC columns subjected to cyclic loading. Engineering structures, 34, pages 187-197.
[24] Mander, J. B., Priestley, M. J. N. and Park, R. (1988). Theoretical stress–strain behavior of confined concrete. Journal of structural Engineering, ASCE, 114(8), pages 1804-1826.
[25] Wang, Y. C. and Restrepo, J. I. (2001). Investigation of concentrically loaded reinforced concrete columns confined with glass fiber-reinforced polymer jackets. Structural Journal, 98(3), pages 377-385. [26] Priestley, M. N., Seible, F. and Calvi, G. M. (1996). Seismic design and retrofit of bridges. John Wiley & Sons, pages 308-312.
[27] Priestley, M. J. N. (2000). Performance based seismic design. Bulletin of the New Zealand society for earthquake engineering, 33(3), pages 325-346. [28] Shayanfar, J. and Bengar, H. A. (2016). Nonlinear analysis of RC frames considering shear behaviour of members under varying axial load. Bulletin of Earthquake Engineering, 5(15), pages 2055-2078. [29] Chen, W. F. (1982). Plasticity in reinforced concrete. New York: McGraw-Hill, page 474
[30] MacGregor, J. G., Sozen, M. A. and Siess, C. P. (1960). Strength and behavior of prestressed concrete beams with web reinforcement. University of Illinois Engineering Experiment Station. College of Engineering. University of Illinois at Urbana-Champaign
[31] Xiao, Y., Esmaeily-Ghasemabadi, A. and Wu, H. (1999). High-strength concrete short beams subjected to cyclic shear. Structural Journal, 96(3), pages 392-399.
[32] Matamoros, A. B. and Sozen, M. A. (2003). Drift limits of high-strength concrete columns subjected to load reversals. Journal of Structural Engineering, 129(3), pages 297-313.
[33] Lehman, D. E., Gookin, S. E., Nacamuli, A. M. and Moehle, J. P. (2001). Repair of earthquake-damaged bridge columns. Structural Journal, 98(2), pages 233-242.
[34] Williams, M. S. and Sexsmith, R. G. (1995). Seismic damage indices for concrete structures: a state-of-the-art review. Earthquake spectra, 11(2), pages 319-349.
[35] Berry, M. P. and Eberhard, M. O. (2005). Practical performance model for bar buckling. Journal of Structural Engineering, 131(7), pages 1060-1070.
[36] Niroomandi, A., Pampanin, S., Dhakal, R. and Soleymani Ashtiani, M. (2015). Comparison of alternative assessment procedures to predict seismic performance of RC columns. In: Proceedings of tenth Pacific conference on earthquake engineering, Sydney.
[37] Truong, G. T., Kim, J. C. and Choi, K. K. (2017). Seismic performance of reinforced concrete columns retrofitted by various methods. Engineering Structures, 134, pages 217-235.
[38] Duong, K. V., Sheikh, S. A. and Vecchio, F. J. (2007). Seismic behavior of shear-critical reinforced concrete frame: Experimental investigation. ACI Structural Journal, 104(3), page 304.
[39] Shayanfar, J. and Bengar, H. A. (2016). Numerical model to simulate shear behaviour of RC joints and columns. Computers and concrete, 18(4), pages 877-901.
[40] Shayanfar, J., Bengar, H. A. and Niroomandi, A. (2016). A proposed model for predicting nonlinear behavior of RC joints under seismic loads. Materials & Design, 95, pages 563-579.
[41] Computer and Structures Inc. (2008). SAP2000 analysis references, Berkeley, California.
[42] American Society of Civil Engineering (ASCE). (2000). Prestandard and commentary for the seismic rehabilitation of buildings (FEMA-356). Federal Emergency Management Agency, Washington.